All terms
Glossary
The load and trim sheet
A load and trim sheet, or loadsheet, is the document prepared before each flight that states the aircraft's weights and center of gravity, checks them against its limits, and is signed by the person who supervised the loading and accepted by the commander.
Written by Jón Rúnar Baldvinsson · Reviewed by Kristján Óttar Rögnvaldsson · Updated
Who makes it
A departure control system produces it from the airline's semi-permanent data: the aircraft's weights, formula, limits and stations. Tekna Vault produces no load sheets: it keeps that data checked, approved and versioned, for the systems that do.
What EASA requires
CAT.POL.MAB.105 asks for mass and balance documentation before each flight:
- it states the items the rule lists, the dry operating mass, the take-off, landing and zero fuel masses and the center of gravity among them;
- a computerised system's output is verified at set intervals;
- the person supervising the loading and the commander sign it, by hand or by an accepted equivalent;
- last-minute changes are recorded on it.
A worked example
ZZ-ABC carries 120 passengers, at an assumed 84 kg each with their hand baggage, and 3,000 kg of cargo. Each line names the datasheet its figures come from:
| Item | Weight | Arm | Index | From |
|---|---|---|---|---|
| Dry operating weight, ZZ-ABC | 38,950 kg | 17.180 m | 60.91 | E5 |
| 10 passengers, section A | 840 kg | 6.770 m | −8.51 | D5, B3 |
| 50 passengers, section B | 4,200 kg | 12.735 m | −17.49 | D5, B3 |
| 60 passengers, section C | 5,040 kg | 22.572 m | +28.59 | D5, B3 |
| Cargo, hold 1 | 1,200 kg | 11.000 m | −7.08 | D2 |
| Cargo, hold 2 | 1,800 kg | 24.400 m | +13.50 | D2 |
| Zero fuel | 52,030 kg | 69.91 = 26.34 %MAC | C4 | |
| Take-off fuel | 9,000 kg | +5.65 | C9 | |
| Take-off | 61,030 kg | 75.56 = 27.18 %MAC | C4 |
The zero fuel weight is under the maximum of 58,000 kg (F1), and its center of gravity inside the zero fuel limits at that weight, 13.51 %MAC to 38.00 %MAC (C5).
The take-off weight is under the maximum of 70,900 kg, and its center of gravity inside the take-off limits at that weight, 15.52 %MAC to 37.99 %MAC.
The dry operating index carries K; every line after it is a change, with no K.
Example Air is a fleet of three A220-300s we use for demonstrations. It is not a real airline, and its figures must never be used to load an aircraft.
In AHM 565 and x565
C2 and C3 state what the airline's loadsheet shows; every figure on it comes from the datasheets the worked example names.
x565 elements:BalanceOutputRequirementPaxTrimOutputRequirementSupplementaryInfoRequirement
Watch for
- K appears once, in the dry operating index.
- A computerised loadsheet is only as right as the data behind it.
- The trim sheet's two scales, %MAC and index, are the same formula read two ways.
- In the United States the document is the load manifest (14 CFR 121.693).
Sources
- EASA, Easy Access Rules for Air Operations: CAT.POL.MAB, mass and balance
- ICAO, Annex 6, Operation of Aircraft, Part I
- UK CAA, CAP 696, Mass and Balance Manual
- Airbus, Safety First #19: Understanding weight and balance
Tekna is independent of IATA. AHM 565 and x565 are IATA's.
Book a demo
Safety-critical data deserves a proper system of record
A 30-minute call on Google Meet: 15 minutes to show you the platform, 15 for your questions.