All terms
Glossary
Weight and balance glossary
The terms an airline's weight and balance data is written in, each with its definition, and for the main ones a formula, a worked example on an airliner and where it lives in IATA AHM 565 and x565.
Terms
- LEMAC, MAC and %MAC
- The mean aerodynamic chord (MAC) is the chord of an imaginary wing with the same aerodynamic properties as the real one. LEMAC is the balance arm of its leading edge, and %MAC states a center of gravity as its distance aft of LEMAC, as a percentage of the MAC's length.
- Balance index
- A balance index is a scaled moment: a weight times its distance from a reference arm, divided by a constant C, plus an offset K that is added once, to the aircraft's own index, so that it never goes negative. It lets a load sheet add balance effects as small numbers instead of large moments.
- Dry operating weight and dry operating index
- Dry operating weight (EASA: dry operating mass) is the aircraft ready for a type of operation, without usable fuel and traffic load: its crew and their baggage, catering and service equipment, potable water and lavatory chemicals included. The dry operating index (DOI) is its balance index, the figure every load sheet starts from.
- CG envelope
- A CG envelope is the area of weight against center of gravity inside which an aircraft may be loaded. The manufacturer certifies one; the airline draws tighter operational envelopes inside it for take-off, zero fuel and landing, to allow for what a load sheet cannot know.
- Fuel index
- The fuel index is the change in an aircraft's balance index that its fuel causes, read from a table of fuel quantity against index. Because a tank's arm moves as it fills, and the tanks fill in a set order, the table is usually cumulative: one figure for the total fuel on board.
- Load and trim sheet
- A load and trim sheet, or loadsheet, is the document prepared before each flight that states the aircraft's weights and center of gravity, checks them against its limits, and is signed by the person who supervised the loading and accepted by the commander.
- Weight and balance manual
- A weight and balance manual is the manufacturer's document for one aircraft type: its certified weights and center of gravity limits, its stations and compartments, its fuel tanks, and how to weigh it and keep its records. An airline's weights engineers turn it into the data its departure control system loads by.
- Certified weights: MTOW, MLW, MZFW and MRW
- The maximum weights the manufacturer certifies for a type, often in several weight variants.
- Curtailment
- Narrowing the manufacturer's center of gravity envelope into an operational one, to allow for what a load sheet cannot know: passengers not sitting where it assumed, crew and trolleys moving in flight, flaps and gear moving, and the fuel's density and burn.
- Seat row trim
- One of three ways a load sheet accounts for where passengers sit.
- Ideal trim line
- The center of gravity, weight by weight, that an airline aims to load to inside its limits, usually toward the aft limit, where the aircraft needs less trim and burns less fuel.
- Tipping and lateral imbalance limits
- Limits for the aircraft on the ground.
- Decks, holds, compartments and positions
- AHM 565 describes where load can go as a hierarchy.
- Weight and balance, mass and balance
- The same discipline in two vocabularies.
Tekna is independent of IATA. AHM 565 and x565 are IATA's.
Book a demo
Safety-critical data deserves a proper system of record
A 30-minute call on Google Meet: 15 minutes to show you the platform, 15 for your questions.