Skip to content

IATA AHM 565, explained

AHM 565 is IATA's standard for the weight and balance data an airline supplies to its departure control and load control systems: the aircraft's weights, balance formula and center of gravity limits, its fuel, holds, cabin and seats, set out as datasheets A1 to H3. This page explains what it holds, who makes it, who uses it, and where it goes wrong.

Written by Jón Rúnar Baldvinsson · Reviewed by Kristján Óttar Rögnvaldsson · Updated

What AHM 565 is

AHM 565 is part of the load control chapter of IATA's Airport Handling Manual, titled “EDP Semi-Permanent Data Exchange for New Generation Departure Control Systems”. It is a recommended practice: one common form in which an airline, its handling companies and its system suppliers exchange the data that sets up a departure control system (DCS) and keeps it up to date.

“Semi-permanent” means data that changes only when the aircraft or the airline's procedures change: the weights, the balance formula, the limits, the layout of the holds and the cabin. What changes on every flight, such as the fuel, the passengers and the load plan, is gathered for each flight and is not part of AHM 565.

The data is kept as a document: each set has an issue and a revision number, and every page states the date it takes effect.

AHM 560, AHM 565 and x565

The manual still carries the older form, AHM 560, beside AHM 565, and the system supplier decides which one it requires. AHM 565 was written for newer departure control systems, and the manual includes a guide to moving from one to the other, AHM 564.

AHM 565 also exists as XML, called x565. IATA publishes its schema in the GOXML toolkit that comes with the digital manual. An x565 file holds the same data as the datasheets, in a form a system can read without anyone retyping it. The current schema is version 1.010.

x565 explained

The datasheets, A1 to H3

The datasheets are grouped by letter. A and B hold the airline's own data, which all its aircraft types share. C to G describe one aircraft type. H holds business rules. An airline supplies one set per aircraft type, with extra sheets for each cabin layout and each hold layout, and for registrations whose data differs.

A: Contacts and documents

A1
Supplier ContactsThe DCS supplier's or ground handler's contacts, and how the data is sent.
A2
Carrier ContactsThe airline's own contacts.
A3
List of RevisionsEvery revision of the set, so everyone can tell they have the current one.
A4
List of Effective SheetsWhich pages are in force, each with its issue and date.
A5
Documents and MessagesThe documents and messages the system produces, and where they go.

B: The airline's standards

B1
Carrier Units and CodesWeight and volume units, class codes and the airline's own load codes.
B2
Crew and Baggage WeightsStandard weights for crew and their bags.
B3
Passenger and Carry-on WeightsStandard weights for passengers and their cabin bags, overall and by class.
B4
Baggage Weights and PlanningChecked baggage weights and planning assumptions.
B5
ULD SpecificationsThe unit load devices (ULDs) the airline uses.

C: The aircraft type

C1
Units of MeasurementThe type, and its units for weight, length, volume, density and moments.
C2
Loadsheet OptionsThe balance and passenger trim figures the loadsheet shows.
C3
Loadsheet OptionsThe loadsheet's supplementary information.
C4
Basic Index and MAC FormulaThe constants that turn a weight and a balance arm into an index and a %MAC.
C5
Centre of Gravity LimitsThe center of gravity envelope the load is checked against.
C6
Centre of Gravity LimitsThe airline's curtailments of that envelope.
C7
Ideal Trim Line and Tipping LimitsThe ideal trim line, tipping limits and lateral imbalance limits.
C8
FuelThe effect of fuel on balance, tank by tank.
C9
FuelThe same effect, cumulative, as the tanks fill.
C10
FuelThe order the tanks fill, and taxi and APU fuel.
C11
Stabilizer and Trim SettingStabilizer trim settings.
C12
IdentificationEach aircraft's registration, serial number and name.
C13
Cargo Heat & VentilationWhich cargo areas are heated or ventilated.

D: Holds and cabin

D1
Dimensions and LimitsThe aircraft's decks.
D2
HoldsHolds and compartments, with their weights, volumes and arms.
D3
ULD ConfigurationsULD positions.
D4
Doors, Locks, and RestraintsDoors, locks, and the rules for missing restraints.
D5
Cabin and Crew LocationsCabin sections, and where the crew sit.
D6
Galley and Other LocationsGalleys, potable water and other locations.
D7
Seating LayoutThe codes that describe each seat.
D8
Seating LayoutThe seat plan, row by row.
D9
Saleable ConfigurationsThe configurations sold, by cabin section and class.
D10
Structural LimitationsRunning and cumulative load limits.
D11
Structural LimitationsCombined, floor and asymmetric load limits.

E: Dry operating weight

E1
Dry Operating Weight Build-UpThe start weight, basic or dry operating, and what the dry operating weight includes.
E2
Crew and Pantry CodesCodes for crew complements and pantry loads.
E3
Potable Water and Fixed WeightsPotable water codes and standard weight adjustments.
E4
Weight Configuration CodesCombinations of those codes.
E5
Aircraft Registration WeightsEach aircraft's weight and center of gravity.

F: Limiting weights

F1
Limiting WeightsMaximum weights, for the fleet or for each aircraft.
F2
Limiting WeightsMinimum weights.

G: Cargo compatibility

G1
ULD CompatibilityWhich ULDs may go in which positions.

H: Business rules

H1
Special LoadsSpecial loads and their limits.
H2
Aircraft SpecificThe aircraft's own business rules, if any.
H3
Aircraft SpecificThe airline's general business rules, if any.

Who makes the data, and who uses it

The data starts with the manufacturer's certified weight and balance documents. The airline's weights engineers turn it into the datasheets: they choose the operational limits to apply inside the certified ones, and build tables such as the cumulative effect of fuel. One person at the airline compiles the data and sends it on.

It goes to everyone who does the airline's load control: its DCS supplier, its ground handlers, and other airlines that operate its aircraft. IATA names four flows: from the manufacturer to the operator, from the manufacturer to a DCS supplier, from the operator to a DCS supplier, and from one DCS supplier to another.

Today it mostly travels as Excel workbooks and PDFs, by email, and is often typed into each system by hand. Every change has to reach every system, in the right version, by the date it takes effect.

Where it goes wrong

A set of datasheets cannot check itself. It can be complete and still be wrong in ways nobody sees until a system refuses it, or accepts it:

  • A table names something no other table defines, such as a crew location, a tank, a galley or a cabin layout, or spells it another way.
  • One aircraft is covered by two versions of the same table, and nothing says which one applies.
  • An index, a %MAC and a balance arm that should agree through the type's formula do not, and nothing says which is the certified value.
  • An extent is stated backwards, or a centroid sits outside its own extent.
  • A cabin section's first and last rows are not rows of that section.
  • A value is in a unit other than the type's.
  • A fuel table's weights do not match its volumes at its density, or the taxi fuel's burn ratios do not add up to one.
  • A total does not equal the sum of its parts.

Each of these is a rule of the standard or its guides, and each can be checked by a machine. Tekna Vault checks every one before a change can be approved.

How an x565 file is checked

Sources

  • IATA, Airport Handling Manual, Edition 44 (2024): AHM 565 and its explanatory material.
  • IATA, x565 implementation guidelines, version 3.1 (June 2024).
  • IATA, GOXML toolkit

Tekna is independent of IATA. AHM 565 and x565 are IATA's.

The weight and balance glossary

Safety-critical data deserves a proper system of record

A 30-minute call on Google Meet: 15 minutes to show you the platform, 15 for your questions.