All terms
Glossary
The balance index
A balance index is a scaled moment: a weight times its distance from a reference arm, divided by a constant C, plus an offset K that is added once, to the aircraft's own index, so that it never goes negative. It lets a load sheet add balance effects as small numbers instead of large moments.
Written by Jón Rúnar Baldvinsson · Reviewed by Kristján Óttar Rögnvaldsson · Updated
The formula
The aircraft's index: Index = W × (arm − ref) / C + K
An item's index change: ΔIndex = W × (arm − ref) / C
%MAC to index: Index = (LEMAC + MAC × %MAC / 100 − ref) × W / C + K
Index to %MAC: %MAC = (C × (Index − K) / W + ref − LEMAC) / MAC × 100A worked example
Example Air's A220-300 uses C = 1000, K = 50 and a reference arm of 16.900 m. ZZ-ABC weighs 38,950 kg at its dry operating center of gravity, 17.180 m:
38,950 × (17.180 − 16.900) / 1000 + 50 = 60.91
60.91 at 38,950 kg = 23.95 %MACThe same 23.95 %MAC at the maximum zero fuel weight, 58,000 kg, is an index of 66.24: converting needs the weight.
One 84 kg passenger in row 4, at 8.800 m, changes the index by 84 × (8.800 − 16.900) / 1000 = −0.68, with no K.
%MAC ↔ index calculator
Index:
%MAC:
The aircraft type's constants (Example Air's to start)
Example Air is a fleet of three A220-300s we use for demonstrations. It is not a real airline, and its figures must never be used to load an aircraft.
In AHM 565 and x565
C, K and the reference arm are chosen by the airline for each aircraft type and stated with the type's balance formula.
Datasheets:C4
x565 elements:IndexConversionConstantValueIndexOffsetConstantValueRefArmMeasure
Watch for
- K belongs to the aircraft's own index only. Added to every item's change, it would move the aircraft by K for every item loaded: an item loaded at the reference arm must change nothing (FAA AC 120-27F, 2.2.1.6; CAP 696, section 4).
- Converting between an index and %MAC needs the weight: one %MAC is a different index at every weight.
- C and K are each airline's choice for each type, so two types' indexes cannot be compared.
- The FAA handbook's “moment index” is a moment divided by a reduction factor, with no reference arm and no K. It is not this index (FAA handbook, p. 5-4).
Sources
- FAA, Advisory Circular 120-27F, Aircraft Weight and Balance Control
- FAA, Aircraft Weight and Balance Handbook (FAA-H-8083-1B)
- UK CAA, CAP 696, Mass and Balance Manual
- Airbus, Safety First #9: Incorrect pitch trim setting at take-off
Tekna is independent of IATA. AHM 565 and x565 are IATA's.
Book a demo
Safety-critical data deserves a proper system of record
A 30-minute call on Google Meet: 15 minutes to show you the platform, 15 for your questions.